Flowseal Ltd
UNIT 25 THE PARKWOOD CENTRE
ASTON ROAD, WATERLOOVILLE
HAMPSHIRE, UK
PO7 7HT

    Tel.  +44 (0)23 92 265031
    Fax. +44 (0)23 92 240382
 

email: sales@flowseal.co.uk

 


  Flowseal Home Page  

Seals and Sealants

  Hylomar Product Range  
  O-Rings  
  Rubber Matting  
  Flowseal Flexigrip Extrusion  
  'U'Channel Extrusions  
  Exp Adhesive Backed Rubber Strip  
  Expanded Rubber Cord  
     

Ambersil Product Range

  Maintenance,Repair & Overhaul  
  Mould Protection / Cleaners  
  Mould Release  
     
     

 

 

 

HYLOMAR PRODUCT RANGE


Gasket Compounds

Hylomar Advanced Formula

Exciting new sealant for the 21st Century

Hylomar Advanced Formula has been designed to stay flexible and seal against oil and water in automotive powertrain and engineering components, running at maximum pressure and temperature. It is important that gasket sealing materials in engines are resistant to the fluids used for lubrication and cooling. Hylomar Advanced formulation has been tested with a range of oils used in the automotive industry, water used for cooling and glycol which is used for freeze protection.

Examples of fluids tested (pass): Water @ 70c, Antifreeze @ 70c, Petrol, Engine Oil GTX @ 120c, and Gear Oil @ 120c.

  • Solvent Free
  • High Temperature sealing (flashpoint over 392c)
  • Withstands rapid vibrations
  • Non-setting and non-hardening even at high temperatures
  • Environmental / user friendly product
  • Immediate assembly/pressure capabilities
  • Non-running qualities
Size: 85g tubes, 350g cartridges
Colour: Blue
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Gasket Compounds

Hylomar Universal Blue

Adopted worldwide for use in sealing petrol, diesel engines and automotive transmissions.
Typical applications include water and oil pumps, instrument inspection covers, cylinder heads and sumps.

Coating pre-formed gaskets, weather proofing motors and outdoor high voltage circuit breakers. Inlet manifolds, timing case covers, oil pump joints, gearbox and transmission components, thread sealing. Gas turbines, water cooled generators, turbo vacuum systems and any machined surface. Material Capability: Universal blue will not affect glass, ceramics or metals. Aero grade available: Hylomar Aero grade is a highly engineered gasketing compound for use in the aerospace industry . It is manufactured under licence from Rolls Royce plc to their manufacturing specification MSRR9055. Defence specification DTD 900/4586.Temperature range for universal blue grades (unchanged) -50c to 250c.

  • Unlimited assembly time allows precise alignment of joints
  • Easy to dismantle due to its non hardening properties
  • Seals surface imperfections
Size: 100g tubes, 250ml tins, 350g cartridges
Colour: Blue
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Gasket Compounds

Hylomar Silicone Sealant Grade 300

HYLOMAR SILICONE SEALANT can be used to produce "form in place" gaskets either by semi automatic application equipment, cartridge gun or direct from syringe. Form in place gaskets reduce large stock holding of different types and sizes of gaskets. All shapes and sizes of gasket can be produced direct from the syringe or cartridge. Hylomar silicone sealant is able to withstand thermal cycling, vibration and mechanical shock ensuring a high performance seal.

**Typical form in place applications : gaskets for crank shaft housing, sumps, gear boxes and water pumps. This gasket compound remains flexible when fully cured and has large gap filling capabilities. **Other typical sealing applications: Glazing, insulating electrical appliances, pipe connections and air conditioning units. Bonding: the high strength nature of silicone sealant makes it ideal for bonding. It is particularly suitable for applications where large gap filling is required. 300 series: Acetoxy curing. General purpose excellent adhesion to glass, ceramics, metals and plastics. High tensile strength for improved mechanical performance

  • 300 series: useable max temp:180 to 240c
  • Resistant to weathering and ageing
  • Electrical insulator
  • Resistant to many solvents
  • Excellent adhesion properties
  • Application Temp : -50c to 60c
  • Elongation Din 53504 : 400%
  • Tensile Strength Din 53504 : 2.1 N/m msq
  • Hardness Shore A/ Din 53504 : 28
  • Consistency - non slump
  • Specific Gravity : 1.05g/ml
  • Skin time 23c/50% rh : 10-20 mins
Product Sizes
for 300 series:
80ml and 300ml cartridges
Colour: Black, Clear and White
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Gasket Compounds

Hylomar Silicone Sealant Grade 310

Silicone sealant Grade 310 has been specifically developed for High temperature applications. It is currently being used for sealing turbines at 350 c. (the temperature range depends on each individual application).

  • Special Feature : High Temperature use
  • Application Temp : -50 to 60 c
  • Elongation Din 53504 : 380%
  • Tensile Strength Din53504 : 2.0N/mmsq
  • Hardness Shore A/ Din53504 : 43
  • Consistency : Non Slump
  • Specific Gravity : 1.30g/ml
  • Specific Gravity : 1.30g/ml
  • Skin Time 23c /50% rh : 10 to 20 mins
  • Useable Maximum Temp : 220c to 280c
Product Sizes
for 310 series:
80ml cartridges
Colour: Green
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Gasket Compounds

Hylomar Silicone Sealant Grade 100

A special engineering grade of silicone sealant which is non corrosive and has low odour. Ideal for use in corrosion sensitive applications. The Silicone Sealant 100 series have a unique curing system which exhibit outstanding mechanical properties.

  • Special Feature - Non Corrosive low odour
  • Application Temp - -50c to 60c
  • Elongation Din 53504 - 350 %
  • Tensile Strength Din 53504 - 2.5 N/m msq
  • Hardness Shore A /Din53504 - 25
  • Consistency - non slump
  • Specific gravity - 1.16g/ml
  • Skin time 23c / 50%rh - 10 to 20 mins
  • Useable max Temp - 180c to 240c
  • Curing system - Amine
Product Sizes
for 100 series:
300ml cartridges
Colour: Ivory, Black and Clear
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Anaerobic Threadlocking / Gasket Compounds

Hylomar Anaerobic Adhesives

Hylomar Anaerobic Adhesives have been developed for locking, retaining, gasketing and sealing a variety of components. They are designed to cure in the absence of air when activated by a metal component or primer. A durable plastic seal is formed which has many useful characteristics.

  • Prevents corrosion
  • Resistant to water, gases, oils, hydrocarbons & many other chemicals
  • Withstands vibration
  • Improved load distribution
  • Lubricates component
  • Wide operating temperature range
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Anaerobic Threadlocking / Gasket Compounds

Hylomar Bearing / Fit Grade 540

Medium strength anaerobic adhesive for the retaining of bearings, liners, bushes, keys and splines that require dismantling.

  • Average Cure time (mins) : 6
  • Average Torque Strength Nm : 18
  • Average Prevailing Torque Nm : 11
  • Viscosity 25 deg/c Brookfield RV11 mPa.s : 400
Bottle Size: 10ml and 50ml Bottles
Colour: Yellow
Technical Data above refers to: 1/B.S Bolt Tested to BS5350 Pt.G1 1987, (All values given are typical and do not constitute a specification).
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Anaerobic Threadlocking / Gasket Compounds

Hylomar Screw Lock / Grade 550

Low strength anaerobic adhesive for thread locking of nuts and bolts that require dismantling.

  • Average Cure time (mins) : 5
  • Average Torque Strength Nm : 4
  • Average Prevailing Torque Nm : 2
  • Viscosity 25 deg/c Brookfield RV11 mPa.s : 1,500
Bottle Size: 10ml and 50ml Bottles
Colour: Purple
Technical Data above refers to: 1/B.S Bolt Tested to BS5350 Pt.G1 1987, (All values given are typical and do not constitute a specification).
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Anaerobic Threadlocking / Gasket Compounds

Hylomar Nut Lock / Grade 580

Medium strength anaerobic adhesive for thread locking of nuts and bolts that require dismantling.

  • Average Cure time (mins) : 4
  • Average Torque Strength Nm : 16
  • Average Prevailing Torque Nm : 13
  • Viscosity 25 deg/c Brookfield RV11 mPa.s : 1,500
Bottle Size: 10ml and 50ml Bottles
Colour: Blue
Technical Data above refers to: 1/B.S Bolt Tested to BS5350 Pt.G1 1987, (All values given are typical and do not constitute a specification).
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Anaerobic Threadlocking / Gasket Compounds

Hylomar Retaining Grade / 600

High strength anaerobic adhesive for retaining of close fitted shafts, bushes, pulleys and rotors not requiring dismantling. High temperature characteristics.

  • Average Cure time (mins) : 4
  • Average Torque Strength Nm. : 27
  • Average Prevailing Torque Nm. : Nut Break
  • Viscosity 25 deg/c Brookfield RV11 mPa.s : 125
Bottle Size: 10ml & 50ml bottles
Colour: Green
Technical Data above refers to: 1/B.S Bolt Tested to BS5350 Pt.G1 1987, (All values given are typical and do not constitute a specification).
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Anaerobic Threadlocking / Gasket Compounds

Hylomar Stud Lock / Grade 580

High strength anaerobic adhesive for thread locking of nuts and bolts that require dismantling.

  • Average Cure time (mins) : 4
  • Average Torque Strength Nm : 26
  • Average Prevailing Torque Nm : Nut Break
  • Viscosity 25 deg/c Brookfield RV11 mPa.s : 650
Bottle Size: 10ml and 50ml Bottles
Colour: Green
Technical Data above refers to: 1/B.S Bolt Tested to BS5350 Pt.G1 1987, (All values given are typical and do not constitute a specification).
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Anaerobic Threadlocking / Gasket Compounds

Hylomar High Strength Retainer / Grade 690

Fast curing, high strength anaerobic adhesive for locking and sealing threads and retaining of cylindrical parts not requiring dismantling. Allows larger machine tolerances. High temperature characteristics.

  • Average Cure time (mins) : 3
  • Average Torque Strength Nm. : 25
  • Average Prevailing Torque Nm. : Nut Break
  • Viscosity 25 deg/c Brookfield RV11 mPa.s : 2,500
Bottle Size: 10ml and 50ml Bottles
Colour: Green
Technical Data above refers to: 1/B.S Bolt Tested to BS5350 Pt.G1 1987, (All values given are typical and do not constitute a specification).
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Anaerobic Threadlocking / Gasket Compounds

Hylomar Brake & Pipeline Sealant / Grade 760

P.T.F.E. modified anaerobic adhesive for sealing pipe fittings and threaded joints. Replaces P.T.F.E Tape and yarn, produces an instant seal against moderate pressure and gives a flexible seal.

  • Average Cure time (mins) : 120
  • Average Torque strength Nm : 3
  • Viscosity 25deg/c Brookfield RV11 mPa.s : 150,000
  • Shear Strength BS 4350 pt G2 1987 N/mmsq : 16
Bottle Size: 100ml
Colour: Ivory
Technical Data above refers to: 1/B.S Bolt Tested to BS5350 Pt.G1 1987, (All values given are typical and do not constitute a specification).
Please note: Customers should satisfy themselves that the product is suitable for their particular application

Anaerobic Threadlocking / Gasket Compounds

Hylomar Multigasket / Grade 4000

Anaerobic curing adhesive for the gasketing and sealing of flanges. Replaces solid gaskets giving a flexible cured film. Seals against gases, water, LPG, Hydrocarbons, oils and other chemicals. Typical Applications: Cast sumps, carburetor manifolds, alloy rocker covers, differentials, axle flanges, any machined surfaces.

  • Average Cure time (mins) : 5
  • Viscosity 25 deg/c Brookfield RV11 mpa.s : 85,000
  • Shear Strength BS 5350 pt G2 1987 N/m msq : 16
Bottle Size: 100ml 
Colour: Orange
Technical Data above refers to: 1/B.S Bolt Tested to BS5350 Pt.G1 1987, (All values given are typical and do not constitute a specification).
Please note: Customers should satisfy themselves that the product is suitable for their particular application